|
|
|
Q.
|
Is the InVision printing system office friendly? |
|
A.
|
Yes. The InVision is designed to fit through 36" doorways, does not require a clean room or special venting, it plugs directly into a standard wall outlet, as well as a 10/100 ethernet network.
|
|
Q.
|
Do I receive the latest software upgrades for free? |
|
A.
|
Yes, while the InVision is under a service contract (Warranty) all software upgrades are free.
|
|
Q.
|
How easy is it, to build a part? |
| A. |
Once your 3D file is saved in the STL (stereolithography) format. It is very easy; Open the InVision print client software, select your stl file, position or add other files if necessary, then select "submit".
|
|
Q.
|
I have never heard of this 3D printer before, is this a new brand, is it reliable? |
|
A.
|
Although it was released to the public recently, it is manufactured by the inventor and pioneer of Stereolithography, 3D Systems. The InVision has been under development for several years and has been extensively tested in the field for over a year.
The InVision utilizes an extremely dependable technology (similar to your inkjet printer) that is capable of speeds and resolutions, equal to or better than, equipment 5 times it's price.
|
|
Q.
|
How difficult is it to post process parts (remove support)? |
|
A.
|
Surprisingly simple. A $29 crock pot or a low temperature oven can be used to melt away the wax support structures, wipe the excess wax with a paper towel and your done. It can take as little as a few minutes.
|
|
Q.
|
How much material can the InVision hold? |
|
A.
|
The InVision holds up to 8 lbs of model and 8 lbs of support material at all times. You can add material while it's building, simply by sliding 1 lb. cartridges into it's easy access front bay.
|
|
Q.
|
Is the InVision fast? |
|
A.
|
Yes, due to the design of the InVision's full width head, it can duplicate the same or a variety of parts, without increasing the build time. Call RPM to explain these amazing attributes. 847-639-0020.
|
|
Q.
|
What can I use these 3D prints for? |
|
A.
|
Actually, the end use for this incredible 3D printer is only limited to your imagination.
Some customers use the 3D parts for; Presentation, marketing studies, meetings, fit form and design verification. The parts can be sanded, painted, plated or used for rubber tooling.
There are many vertical markets that could truly benefit from this technology such as; Product Designers, Architects, Educational facilities, Medical professionals, Patent Attorneys, Service Bureaus, Aerospace, Engineering Departments, Jewelry Designers and more...
|
|
Q.
|
Can I get a free sample part? |
|
A.
|
Yes, of course. Please call RPM Products at 847-639-0020 and we will ship you a free sample. If you have an STL file of an existing design that you would like built, please don't hesitate to ask your RPM Products representative.
|
|
|
At RPM Products, we strive to educate our customers. We want you to be well informed, before making such an important purchasing decision.
Please do not hesitate to call us with any questions at: 847-639-0020.
|
|
|
|
